CompleteStaff

Electro/Mechanical Technician

by

Electro/Mechanical Technician Job Description:

  • Assemble and prepare sub-assemblies of fabricated parts and equipment working from blueprints or product specifications using standard hand and power tools.
  • Test and calibrate completed units to ensure parts and mechanisms meet product specifications.
  • Perform final inspection on assembled and tested equipment.
  • May rebuild and repair customer con rods.
  • Travel occasionally to customer sites to assist in service calls or perform routine job duties.

Electro/Mechanical Technician Job Requirements:

  • Ability to read and understand electrical schematics and mechanical drawings
  • experience with specialized tools and measuring instruments.
  • Basic electrical and mechanical skills and previous machine shop experience helpful
  • High School diploma
  • Valid Drivers License
  • While traveling, may require overnights in-transit or in a hotel.

 

 

Production Supervisors

by

Production Supervisor Job Description:

  • Maintain procedures to ensure BOM accuracy for all manufactured products
  • Scheduling responsibility for efficient production and pad-printing operations including required IQ OQ PQ validation activities
  • Continue to development and implement plans for improvement of manufacturing processes for new and existing products with an emphasis on waste, scrap and lead time.
  • Create and maintain necessary documentation and reports showing the goals and objectives of the company
  • Provide leadership and training of manufacturing staff
  • Maintain responsibility for IQMS systems, policies, procedures and related customer communication to ensure the quality and reliability of products produced
  • Responsible for the timely evaluation and discipline of all manufacturing staff and their adherence to approved company policies and procedures in accordance with ISO13485 standards
  • Manage material handling and inventory control to ensure on time customer delivery, warehouse efficiency and reporting accuracy
  • Schedule & verify preventative maintenance in IQMS including proper documentation

Production Supervisor Job Requirements:

  • Bachelor’s degree in operations management, engineering or related field strongly preferred, but will consider an individual with a sufficient level of coursework or experience beyond high school to obtain the necessary technical and management skills required for the position
  • A minimum of five years of plastic industry and operations management experience with ability to demonstrate sophisticated knowledge of medical plastic processing techniques using a wide variety of resin materials
  • Background in quality including firm understanding of processes and procedures to support and maintain ISO certification
  • The ability to add, subtract, multiply, and divide all units of measure including whole numbers, common fractions, and decimals; the ability to compute rate, ratio, and percentages and interpret graphs
  • Intermediate to advanced personal computer skills experienced at Microsoft Office applications with very strong background in ERP systems including effective use of MRP
  • APICS Certification preferred

** 6 am – 6 pm AND 6 pm – 6am   –  3 days on/4 off/4 on/3 off (work every other weekend)**

 

 

Wood Furniture Mill Assembly

by

YOU CAN FEEL GOOD ABOUT WORKING FOR THIS COMPANY!  They are producing furniture in an environmentally friendly way!  Component-based construction allows for individual components to be replaced – so less goes into a landfill!  Superior strength allows their products to be used for decades AND most of their suppliers are from the USA with a few in Canada and Europe.

Wood Furniture Assembly Job Description:

  • Use nail guns, staple guns, clamps, adhesives and drills, to assemble various wood pieces to build furniture bases.
  • Work will be done in the mill department

Wood Furniture Assembly Job Requirements:

  • Prior manufacturing experience is preferred.
  • Preference given to candidates with prior woodworking experience.
  • Experience with hand tools
  • Ability to lift furniture pieces

This is a Monday – Thursday 6 am – 4:30 pm schedule. Benefits include health, wellness, dental, vision, and life insurance, Teladoc, 401k, Paid Time Off (PTO) and holiday pay.

 

PCB Analyzer

by

PCB (Printed Circuit Board) Analyzer Job Description:

  • Analyzing and repairing PCBs
  • Collecting and managing PCB failure data
  • Working with Production, Engineering and Quality to determine root causes of problems and implement corrective actions.

PCB (Printed Circuit Board) Analyzer Job Requirements:

  • IPC certified in soldering
  • 2 yr technical degree
  • Familiar with in -circuit testing processes and equipment (ICT)
  • 5+ years’ experience of electronics problem solving and repair and maintaining and modifying test platforms
  • Knowledge of Microsoft Office suite (Outlook, Word, Excel, PowerPoint, Teams)
  • Ability to lift up to 50 lbs.
  • Ability to spend extended periods of time using a microscope

About this Company

  • Health, prescription, dental and vision coverage are available on your first day
  • 100% match for the first 6% you contribute to the 401K you are immediately vested in
  • 17 PTO days/year and 14 paid holidays/year
  • Education Tuition assistance
  • Training and Career Advancement within the organization

PCB Technician

by

PCB (Printed Circuit Board) Technician Job Description:

  • Working closely with the PCB analyzer as the PCB Repair Technician to repair PCB’s
  • Help collecting and managing PCB failure data.
  • Working with Production, Engineering and Quality to determine root causes of problems and implement corrective actions.

PCB (Printed Circuit Board) Technician Job Requirements:

  • Familiar with in-circuit testing processes and equipment (ICT)
  • Electronics problem solving and repair (prior experience preferred)
  • Maintaining and modifying test platforms (prior experience preferred)
  • Knowledge of Microsoft Office suite (Outlook, Word, Excel, PowerPoint, Teams)
  • Good visual acuity (spending 8+ hours on microscope) Ability to manipulate small parts, requiring good dexterity

 

Quality Inspector

by

Quality Inspector Job Description:

  • Assists the Quality Assurance Manager in the inspection and verification of product. The Quality Inspector will execute a variety of Quality Control and Quality Assurance tasks consistent with a focus on manufacturing processes and corporate quality objectives and metrics.
  • The Quality Inspector may also perform secondary operations or manufacturing tasks as needed / required.
  • Tasks may include measurement and data analysis, in combination with feature assessment and identification of conformance.
  • The Quality Inspector will assist production and operations by performing Inspection and documenting results of Materials, Components, Processes, and Procedures.
  • First piece inspection, in process and final inspection. Troubleshooting and analysis of results. Perform calculations and math functions. Evaluation of in-process variables using Statistical Process Control (SPC) methods and techniques
  • Component Layouts, Inspections, and associated Documentation ·
  • Set up and operate testing equipment. Perform calibrations and assist in maintaining calibration system
  • Assist in MSA (Gage R & R) studies.
  • Ensure compliance with the “Control of Non-Conforming Material” process

Quality Inspector Job Requirements:

  • High school or equivalent
  • Must be able to use microscopes, comparators, micrometers as well as other measuring instruments.
  • Previous experience in a manufacturing environment or quality lab is preferred.
  • Knowledge of SPC and/or GD&T training is a plus.
  • Must have solid math and Microsoft Excel skills.

 

Industrial Sewing

by

YOU CAN FEEL GOOD ABOUT WORKING FOR THIS COMPANY!  They are producing furniture in an environmentally friendly way!  Component-based construction allows for individual components to be replaced – so less goes into a landfill!  Superior strength allows their products to be used for decades AND most of their suppliers are from the USA with a few in Canada and Europe.

Industrial Sewing Job Description:

  • Operate sewing machinery to perform single and double needle sewing operations.
  • Operate sewing machines and serger to join pre-cut upholstery pieces.
  • Align pieces to preserve grain and/or pattern
  • Adjust machines to stitch various types of fabrics
  • Properly sew an assortment of high quality covers from a variety of fabrics and materials
  • Inspect fabric pieces during assembly and upon completion to ensure compliance with established product quality criteria.

Industrial Sewing Position Requirements:

  • Good hand-eye coordination, concentration skills and a demonstrated attention to detail.
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manual

Monday – Thursday schedule, 3 day weekend! Benefits include health, wellness, dental, vision, and life insurance, Teladoc, 401k, Paid Time Off (PTO) and holiday pay.

Production Lead – Clean Room

by

Production Lead – Clean Room Job Description:

  • Work in a cleanroom ISO class 6 environment, supervising 4-5 associates
  • Follow detailed work instructions, SOPs, Batch Records and procedures to correctly assemble/package finished goods.
  • Report problems with quality, processes, equipment, or materials to the Production Supervisor or Production Manager.
  • Complete applicable line clearance, compliance and timely completion of training records and execute right first-time batch records with GDP/GMP compliance top of mind
  • Conduct and direct daily, weekly and monthly cleaning protocols of ISO class 6 clean room and anti-room.
  • Assist in product/process development and validation in the clean room environment.
  • Maintain inventory for Clean Room Supplies.

Production Lead – Clean Room Job Requirements:

  • The ability to add, subtract, multiply, and divide all units of measure including whole numbers, common fractions, trigonometry, geometry and decimals; the ability to compute rate, ratio, draft angles and percentages and interpret graphs and statistics
  • A.S. Degree required in Engineering and/or Business.
  • Experienced at Microsoft Office applications with very strong knowledge of Solidworks, Moldworks, or similar 3D CAD software including the ability to manipulate geometry, splines, curves, radii, complex surfaces and solids
  • Color vision with the ability to identify and distinguish colors
  • Good organization and communication skills.

**6 pm – 6am   –  3 days on/4 off/4 on/3 off (work every other weekend)**

Quality Inspector

by

Quality Inspector Job Description: 

  1. Read geometric dimensions and tolerance characteristics and symbols
  2. Ability to read blueprints and interpret complex 2D drawings, and compare work pieces against one another to assess variations
  3. Able to locate reference points on parts and measure dimension such as angles, arc, and radii, using combination of measurement tools.
  4. New products, products produced with new tooling, tooling repair, perform first piece layouts and report findings on layouts.
  5. Performs complete layout inspections by measuring dimensions, such as length, height, and distance between reference points. Using precision instruments, micrometer, caliper, dial indicator, optical comparator and CMM to ensure product meets specifications.
  6. Perform daily quality first piece, frequency, & final piece inspection for production runs.
  7. Oversee company calibration program, perform Gage R/R and annual calibration requirements
  8. Deliver training to inspectors/ operators and other production personnel.

Quality Inspector Job Requirements: 

  1. High School diploma or equivalent GED – FDA / ISO 13485 or ISO-9001 experience preferred.
  2. Ability to use quality tools and equipment including calipers, micrometer, depth micrometer, indicators, gage pins, gage blocks, height and pin gages, coordinate measurement machine (CMM) or precision optical equipment
  3. Five years relevant work experience in inspection and measurement in a FDA / ISO 13485 medical manufacturing environment preferred. Will consider ISO-9001 environment.

** 6 am – 6 pm and 6 pm – 6 am    3 days on/4 off/4 on/3 off (work every other weekend)**

Machine Operators – Secondary

by

Secondary Operator Job Description:

  • Candidate will be responsible for the secondary operations of washing, trimming and deburring metal parts.
  • Candidate will be required to read blueprints and use calipers and micrometers.

Secondary Operator Job Requirements:

  • Attention to detail
  • Ability to stand for 8 hour shift