Currently seeking a 2ND SHIFT (2pm-10:30pm) – Blaster/De-coat Operator and Tool Prepper for our Brookfield, WI headquarters. Under the direction of the Coating Division Manager and Coating Lead, set-up and operate wet polishing machines, perform de-coat operations on customer tooling orders, prepare internal and external orders for the coating process by inspecting, racking, tagging and cleaning tools using automated and manual processes. As part of their primary responsibilities, this individual will also ensure final coated product is inspected for quality, re-packaged and routed to next operations.

Responsibilities of the Tool Prep Operator include but are not limited to:
Visually inspects product for unacceptable coating conditions or defects prior to pre-polishing or post-polishing.
Loads product into wet polishing and/or de-coating fixtures following production routing.
Responsible for correct condition of blasting and de-coating systems, setting of parameters.
Correctly carries out the wet blasting/polishing and de-coating processes according to the router and documentation.
Maintain safe working conditions and cleanliness of work areas at all times.
Interact with internal and external customers in a ‘customer-friendly’ manner.
Receive and inspect product for processing, verify product order number, process sequence, specifications, special instructions, and quantity.
Inspect product for unacceptable coating conditions; route product for appropriate operation.
Follow appropriate procedures for tooling to complete the automated cleaning process.
Perform manual cleaning using chemical and mechanical methods.
Responsible for performing daily process control on equipment.
Break down loads by matching paperwork, before forwarding to next operation.
Inspect finished product.; verify product is acceptable to move to next operation.
Maintain organization and cleanliness of workstation and equipment.
Participate in continuous improvement activities.
Perform other related duties as assigned.
EDUCATION:

High school diploma or equivalent required.

SKILLS/EXPERIENCE:

Ability to read, understand and follow written instructions such as S.O.P.’s, work instructions, technical documents, and manufacturing prints.
Ability to perform written communication
Strong mechanical aptitude with ability to use basic hand tools.
Previous experience with basic machine operation, metallurgy, coating processes, vacuum technology is desirable. Knowledge of industrial cutting tools (e.g. drills, end mills, dies, etc.) preferred, but not required.
Individual must have strong work ethic, be high-energy, and detail-oriented.

SUMMARY OF POSITION
Responsible to perform geometric dimensional inspections on received goods, first article, in-process and finished cutting tools. Work from blueprints, uses inspection equipment with minimal amount of supervision.

PRINCIPAL RESPONSIBILITIES
• Inspect to drawing specifications for accuracy and completeness.
• Use inspection equipment to measure tools for all parameters per Guhring Specifications and customer requirements.
• Inspect tools for visual defects.
• Perform measurement of tool geometry and characteristics.
• Document measurements including non-conformances on inspection report forms.
• Complete inspection reports per customer requirement as required.
• Consult with engineers and production personnel to acquire information as directed.
• Perform internal process audits as directed.
• Responsible for keeping area clean at all times.

EDUCATION

Associates degree or three to five years related experience and/or training; or equivalent combination of education and experience.
SKILLS/EXPERIENCE

• Previous experience in ISO Certified organization.
• Apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Must have demonstrated proficiency in mathematics, blueprint reading, inspection techniques, use of callipers, micrometers and other inspection equipment.
• Must have knowledge of PC’s and Microsoft Office products.
• Ability to establish and maintain working relationships with customer, suppliers and fellow co-workers.
• Exhibits a positive “customer service” approach when interacting with internal and external candidates.
• Demonstrated ability to analyze and solve problems typical of manufacturing processes (SPC, 5 why’s, Fishbone diagrams, flow charts etc.
PHYSICAL REQUIREMENTS/WORKING CONDITIONS
While performing the duties of this job, the employee is regularly required to stand; sit; use hand to handle, or feel objects, tool or controls; and reach with hands and arms. The employee frequently is required to walk. The employee is occasionally required to climb or balance, stoop, kneel, or crouch; talk or hear and smell. The employee must regularly lift and/or move up to 75 pounds. Specific vision abilities required to perform this job include close vision and color vision.

SUMMARY OF POSITION:

Under the direction of the Coating Division Manager and Shift Lead prepare internal and external orders for the coating process by inspecting, racking, tagging and cleaning tools using automated and manual processes. As part of their primary responsibilities, this individual will also ensure final coated product is inspected for quality, re-packaged and routed to next operations.

PRINCIPAL RESPONSIBLITIES:

• Interact with internal and external customers in a ‘customer-friendly’ manner.
• Receive and inspect internal and external customer product for processing.
• Verify product order number, process sequence, specifications, special instructions, and quantity.
• Inspect product for unacceptable coating conditions.
• Route product for appropriate operation.
• Put product in tray for cleaning.
• Place product in baskets for automated cleaning process.
• Perform manual cleaning using chemical and mechanical methods as necessary.
• Verify cleanliness before routing to next operation.
• Responsible for performing daily process control on equipment.
• Responsible for breaking down loads by matching tag on carousel to paperwork, bin and tool before forwarding to next operation.
• Inspect finished product to verify quality coating.
• Post all performed operations into SAP and manually sign off to verify completion of task.
• Verify product is acceptable to move to next operation.
• Maintain organization and cleanliness of workstation and equipment.
• Participate in continuous improvement activities.
• Perform other related duties as assigned.

EDUCATION:

Preferred high school diploma or equivalent.

SKILLS/EXPERIENCE:

• Ability to read, understand and follow written instructions such as S.O.P.’s, work instructions, technical documents, and manufacturing prints.
• Ability to perform written communication
• Knowledge of industrial cutting tools (e.g. drills, end mills, dies, etc.) preferred, but not required.
• Individual must have strong work ethic, be high-energy, and detail-oriented.

PHYSICAL REQUIREMENTS/WORKING CONDITIONS:

While performing the duties of this job, the employee is regularly required to stand; sit; use hand to handle, or feel objects, tool or controls; and reach with hands and arms. The employee frequently is required to walk. The employee is occasionally required to climb or balance, stoop, kneel, or crouch; talk or hear and smell. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required to by this job include close vision and color vision.

DISCLAIMER:

The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required. The job description is subject to change at any time with or without notice. Reasonable accommodations will be made to enable qualified individuals with disabilities to perform the essential functions of the position.

Looking for a 1 st shift, 5am – 3pm, Monday thru Thursday, shipping & receiving person.  Must know how to operate forklift.  Know LTL shipments, UPS World ship.  Palatize and package shipments.

Seeking a CNC Precision Tool Grinder,multi-axis CNC universal grinding machines and robotic auto-loading accessories used to manufacture precision cutting tools from solid carbide blanks.

As a CNC Precision Tool Grinder you will be responsible for but not limited to:

• Setup and operate equipment to perform complex machining operations to close tolerance customer specification.
• Operate multi axis CNC grinding machines to manufacture, sharpen and recondition carbide or high speed steel end mills and drills.
• Perform frequent changeovers for small quantity custom orders.

Successful candidates would have a blend of experience including:

• Proven inspection skills and ability to work to very tight tolerances
• Above average math and problem solving skills; demonstrated ability to use basic trigonometry to calculate angles
• Machine set ups and adjustments
• Computer literate, ability to enter programs and must be able to use measuring/testing equipment
• Read and interpret blueprints
• Previous experience operating CNC grinding equipment such as: Walters, ANCA, Star, Schutte, Rollomatic preferred

Growing manufacturer of UL heavy gauge steel fuel tanks, trailers, large generator enclosures and modular metal enclosures for housing fully-equipped electrical distribution and control equipment.

We are seeking dedicated .035/.045 2^nd Shift MIG Welders who are dedicated, detail orientated and with a desire to work OT

Responsibilities: (what you will be doing)

• Welding I-Beam Frame and Fuel Tanks in flat/vertical overhead positions.  The sheet metal thickness will range from 10 gauge up to ½ inch.
• Clamp, hold, tack-weld, grind or bolt component parts to obtain required configurations and positions for welding
• Position and secure workpieces, using hoists, cranes, wire and banding machines or hand tools

Inspect products/equipment for defects/malfunctions

Looking for a cleaner for the production floor, pay rate is $15.00 an hour, work schedule is 6am to 2:30 pm.