CompleteStaff

Sheet Metal Operator

by

Sheet Metal Operator Job Responsibilities: 

  • Performs cutting and shaping operations on a variety of steel materials.
  • Read technical drawings, reports, and work instructions.
  • Set up, fit, and position weldments, having a number of parts.
  • Participate in cross functional teams to address and resolve manufacturing, design, and quality problems, and to ensure the continuous improvement of processes and methods.

Sheet Metal Operator Job Requirements:  

  • High School Degree or equivalent required; three to five years of related experience preferred but not necessary
  • Lean Manufacturing experience
  • Ability to read tape measures, basic math

Saw Operator

by

Saw Operator Responsibilities:

  • Read technical drawings, reports, and work instructions.
  • Perform cutting and shaping operations, working with a variety of mild steel, stainless steel, structural angle, channel, and tubing.
  • Set up and maintain all saw equipment.
  • Set up, fit, and position weldments, having many parts.
  • Participate in cross-functional teams to address and resolve manufacturing, design, and quality problems, and to ensure the continuous improvement of processes and methods.

Saw Operator Requirements:

  • High School Degree or equivalent required; three to five years of related experience preferred but not necessary
  • Ability to read and interpret technical drawings, blueprints, reports, and work instructions accurately
  • Experience performing cutting and shaping operations on metals.
  • Lean Manufacturing experience
  • Ability to read tape measures, basic math

CS-ELK

Utility Technician

by

Utility Technician Responsibilities:

  • Read technical drawings, reports, and work instructions.
  • Perform electrical wiring and assembly.
  • Perform gas, water, and air assembly.
  • Thread piping, bend conduit, and assemble, as needed.

Utility Technician Requirements:

  • High School Degree or equivalent required; three to five years of related experience preferred but not necessary
  • Lean Manufacturing experience
  • Ability to read tape measures, basic math
  • Blueprint reading skills are a plus

An applicant isn’t expected to have all the necessary skills.  There would be some on-the-job training.

CS-ELK

Slitting Department Operator

by

The Slitting Department Operator will sets up, operate, and maintain slitting machines to precisely cut large rolls of plastic. 

 Slitting Department Operator Key Responsibilities:
  • Safely operate slitting equipment, load raw material, thread material through the machine, and adjust settings (knives, tension, speed) per work orders.
  • Perform visual inspections, use measuring tools (calipers, micrometers) to ensure precise slit width and edge quality, check for defects, and package finished goods according to specifications.
  • Interpret work orders, set up knives, configure machine parameters, and troubleshoot issues like wrinkles or incorrect tension.
  • Move and change heavy parent rolls and finished slit rolls,  using forklifts and cranes
  •  Accurately complete production paperwork, log data, and scan materials into production systems.
Slitting Department Operator Essential Skills & Requirements:
  • Ability to stand for long periods, lift heavy objects (50+ lbs), and perform repetitive motions.
  • Prior experience in a production environment is ideal.

2 pm – 10 pm shift

 

 

 

Manufacturing Maintenance Technician

by

Maintenance Technician Job Responsibilities

  • Perform general and preventative maintenance on building.
  • Preventative maintenance on CNCs, Ovens, Mixers, Blasters & all other equipment.
  • Trouble shooting, and servicing mechanical breakdowns.
  • Read blue prints, electrical schematics and understand PLC’s motor and servo drives.
  • MIG and TIG welding as well as plasma cutter use.

Maintenance Technician Skills and Qualifications:

  • Working knowledge of the functions of CNC machines; prefer PLC experience.
  • Knowledge of AC/DC motors and Variable Frequency Drivers
  • Be able to work effectively with team members to achieve individual and team projects with targets and deadlines.
  • Helpful if you are familiar with the function and sequence of natural gas ovens.
  • Basic plumbing experience.
  • Ability to lift heavy items as well as push, pull, bend and stretch.
  • Read write and speak English.
  • MIG and Stick welding
  • Strong industrial background with at least 3 years’ experience.
  • High school and/or equivalent diploma with some electrical schooling or training.
  • Must provide own hand tools for use in repair of equipment.

 

Manufacturing Operations – Great Entry Level Opportunity

by

You won’t find a cleaner or more comfortable work environment than this!  Want to pass the time listening to music or podcasts? Bring your headphones to this climate controlled (air conditioned) job.  Because the shift sizes are small you are known as a team member, not just a number.  The work you do supplies electronics for the automotive, medical, and outdoor power industries including analog, digital, and microcontroller-based assemblies, sensors, controls, and LED lighting assemblies.

Manufacturing Operations Job Description:

  • The candidate would be responsible for electronic assembly of small circuit boards and would be responsible for through-hole soldering.
  • In addition will operate and load wave solder and SMT machines and will do sub assembly of parts.

Manufacturing Operations Job Requirements:

  • Must have above average attention to detail
  • Dexterity to work with very small parts
  • Ability to stand for 10-hour shift

Medical, dental and vision insurance, life insurance and long-term disability, 401K, health care flexible spending account and referral bonuses are part of their comprehensive benefits package.

 

 

 

 

CNC Machinist/Set-up

by

CNC Machinist/Set-up Responsibilities:

  • Set up and operate CNC machinery and make advanced adjustments to ensure precise production.
  • Develop, optimize, and maintain CNC programs, tooling, fixturing, and setup procedures to improve efficiency and quality.
  • Troubleshoot and resolve complex CNC machine issues to minimize downtime and maintain productivity.
  • Perform part inspections using micrometers, calipers, and other precision tools to ensure parts meet quality specifications.
  • Train and assist CNC operators with setups, troubleshooting, and adherence to quality and production processes.
  • Document production data, setups, inspections, and machine performance in ERP systems and maintain accurate records.

CNC Machinist/Set-up Requirements:

  • 3+ years of machinist experience with lathes or mills, including 1+ year of set-up experience
  • Ability to interpret blueprints and understand GD&T and G&M codes
  • Compliance with safety regulations and proficient use of measuring instruments

Monday -Thursday schedule, enjoy a three day weekend!!

CS-ELK

CNC Machine Operators

by

CNC MACHINE OPERATOR JOB DESCRIPTION:

  • Operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic work pieces
  • Load/unload a CNC vertical or horizontal machining center.
  • Read & understand drawings of parts.
  • Adjust machine feed & speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
  • Calculate machine speed & feed ratios & the size & position of cuts.
  • Check to ensure that workpieces are properly lubricated & cooled during machine operation.
  • Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions.
  • Clean machines, tooling, or parts, using solvents or solutions & rags.

CNC MACHINE OPERATOR REQUIREMENTS:

  • Must be able to inspect parts & revise CNC program as required.
  • Must have at least one year experience operating a CNC machine center in a manufacturing environment.
  • Ability to accurately measure parts using a micrometer and caliper.
  • Attention to detail and strong work ethic.

 

2nd shift – 4:00pm-2am M-Th (IF OT Fri 2:30 -11)

 

Maintenance Technician

by

You won’t find a cleaner or more comfortable work environment than this!   Because the shift sizes are small you are known as a team member, not just a number.

Maintenance Technician Job Description:

  • Working from prints and wiring diagrams, perform mechanical and electrical repairs to production equipment.
  • Completes preventative maintenance and order parts and supplies as needed
  • Maintain plant, tools and equipment
  • Assists in implementation and installation of new equipment
  • Train operators to ensure smooth operation of production equipment

Maintenance Technician Job Requirements:

  • Must have three to five years experience in a high volume manufacturing environment.
  • Electrical, Hydraulic, Mechanical and PLC knowledge
  • Valid driver’s license.
  • An associate degree in electronic technology, automated manufacturing systems, or electro-mechanical systems.

Medical, dental and vision insurance, life insurance and long-term disability, 401K, health care flexible spending account and referral bonuses are part of their

CS-ELK

Staffing Specialist/Recruiter

by

We are seeking an energized, organized, and customer service–driven individual to join our Elkhorn office as a Staffing Specialist/Recruiter. In this highly rewarding role, you’ll make a real impact by helping candidates navigate their job search while partnering closely with our business clients to fill light industrial, skilled trades, semiprofessional, and office positions.

Key Responsibilities:

  • Complete new hire and applicant onboarding paperwork
  • Interview candidates and conduct background checks and assessments
  • Coordinate client interviews and client-specific orientations
  • Process weekly payroll accurately and on time

Qualifications:

  • Prior office and/or customer service experience required
  • Proficiency in Microsoft Office Suite
  • Strong written and verbal communication skills
  • Ability to multi-task, stay organized, and maintain accuracy in a fast-paced environment
  • Comfortable with the sales aspect of recruiting
  • Manufacturing knowledge is a plus, but not required

What We Offer:

  • Competitive base pay plus commission
  • Employer-paid insurance for CompleteStaff employees
  • A truly rewarding career helping people find meaningful employment

CS-ELK